Adhesive for Medical Plaster
Medical plasters are made by melting and mixing the medicine and hot-melt adhesive, and then coated on the plaster cloth and pasted on the skin of human body.
Zinc oxide and other materials can be added according to the proportion required by customers.
Including: Spunlace , PE film, PU film, etc.
Coating method: Transfer coating, etc.
Technical essential: Initial bonding, peel strength, weather resistance, etc.
Coating gram weight: Plaster (50-200 gsm).
Shape |
Block |
Color |
White, green, blue, red, yellowish, transparent, etc. |
Packaging |
1kg/pc, 25kg/CTN; 6.25kg/pc, 25kg/CTN |
Coating Methods |
Standard hot melt slot, nozzle, spiral spray applicator. |
Feature |
Non-allergic, good comprehensive performance |
Operation Temperature |
Usually 160~170℃;Softening point:95℃, |
Storage |
Stored in dry and cool place with temperature below 40℃. |
Precautions:
1.Do not mix with other adhesives.
2.Keep container sand pre-melters covered to avoid contamination.
3.As material is applied hot, appropriate clothing and eye protection should be used.
4.Rotate stock -First in, first out.
While satisfying existing customer technical support and service, we can improve the speed of product innovation, provide customized services for customers, and provide personalized bonding solutions for customers. For information on the full line of products or requested MSDS/TDS.
Any quesiton, please contact us!